УРОВЕНЬ

Ultrasonic measurement Time-of-Flight Prosonic FDU90

Ultrasonic sensor for level and flow measurement for connection to FMU9x (measuring range up to 3m) 

The FDU90 ultrasonic sensor for continuous, non-contact and maintenance-free level measurement of fluids, pastes, sludges and powdery to coarse bulk materials. But also for flow measurement in open channels and measuring weirs. The measurement is unaffected by dielectric constant, density or humidity and also unaffected by build-up due to the self-cleaning effect of sensors. Suited for explosion hazardous areas. Maximum measuring range in liquids 3m (9.8ft), solids 1.2m (3.9ft).

Преимущества

Integrated temperature sensor for Time-of-Flight correction. Accurate measurements are possible, even if temperature changes are present

Hermetically welded PVDF sensor for highest chemical resistance

Suited for rough ambient conditions thanks to separate installation from the transmitter
(up to 300m)

Reduced build-up formation because of the self-cleaning effect

Integrated automatic sensor detection for transmitters FMU90 /FMU95 for simple commissioning

Weather resistant and flood-proof (IP 68)

Integrated heating against a build-up of ice at the sensor (optional) ensures reliable measurement

Область применения

Sensor for continuous, non-contact level measurement of fluids and bulk materials in silos, on belts, stockpiles and in crushers. Also flow measurement in open channels and at weirs. Typically used in measurements in low structural heights.

Process connection: Thread

Temperature: -40 to +80°C (-40 to +176°F)

Pressure: +0.7 to +4bar (+10 to +58psi)

Maximum measuring range: Liquids 3m (9.8ft), solids 1.2m (3.9ft)

Blocking distance: 0.07m (0.23ft)

International explosion protection certificates

Характеристики и спецификации

Принцип измерения
Ультразвуковой

Характеристики/Применение
Раздельное исполнение с полевым преобразователем или под монтаж на DIN-рейку, датчик и пребразователь могут быть разнесены на расстояние до 300м

Доп.информация
Защитная трубка

Питание / Коммуникация
4х-проводная схема подключенния (HART, Profibus DP)

Погрешность
+/- 2мм + 0.17% от значения измерения

Температура окружающей среды
-40 °C ... 80 °C

Рабочая температура
-40 °C ... 80 °C

Рабочее давление абс. / макс. предел избыточного давления
0.7 бар ... 4 бар абс

Смачиваемые части
PVDF (IP68 / NEMA6P)

Присоединение к процессу
Резьбовое спереди:
G / NPT 1 1/2"

Резьбовое сзади:
G / NPT 1"

Монтаж в крышу резервуара

Блокирующая дистанция
0.07 м

Использование


Макс. значение измерения


Связь
Преобразователь:
4 ... 20 мА HART
Profibus DP

Сертификаты/Нормативы
ATEX, FM, CSA, IEC Ex, INMETRO, NEPSI

Опции
Второй выходной сигнал 4...20мА

Компоненты
Преобразователь:
FMU90, FMU95

Диапазон применения
При наличии пены/высокой турбулентности:
FDU91

Для сканера парков резервуаров:
FMU95