Температура

iTHERM ModuLine TT131

Welded thermowell for a variety of industrial applications 

This thermowell designed according to DIN 43772 guarantees a high resistance to most industrial process environments. It is made from pipe or tube and is available in a wide range of diameters and materials. A specially designed thermowell tip ensures fast response times for a more efficient process control. Oversheaths in PTFE or tantalum can withstand extremely corrosive process conditions. It is offered with a variety of process connections: flanges, threads, weld-in or compression fittings.

Преимущества

Modular configuration according to DIN 43772

iTHERM QuickNeck: cost and time savings thanks to simple, tool-free recalibration of the insert

Extension, immersion length and total length can be chosen according to process requirements

Wide choice of dimensions, materials and process connections available

Specially designed tip for fast response times

Область применения

Protects the temperature sensor against physical and chemical stress

High robustness for challenging process conditions

Pressure range: up to 100 bar (1450 psi)

For use in pipes, containers or tanks

Improved ease of maintenance (sensor replacement without process shutdown) and recalibration of the measuring point

Характеристики и спецификации

Принцип измерения
Сварная термогильза

Характеристики / Применение
- метрические размеры
- согласно DIN 43772
- присоединение к процессу: резьбовое, фланцевое, обжимной фитинг
- с шейкой

Соединительная головка
Внешняя резьба:
M24 x 1,5, 1/2" NPT, G1/2

Внутренняя резьба:
M20 x 1,5, 1/2" NPT, G1/2

QuickNeck

Макс. стандартная погружная длина
4500 мм (177")

Максимальная длина по запросу
4500 мм (177")

Присоединение к процессу
Резьба:
- G3/8", G1/2", G3/4", G1"
- NPT1/2", NPT3/4", NPT 1"
- M18x1,5, M20x1,5, M27x2, M33x2
- R1/2", R3/4"

Накидная гайка:
- M20x1,5, G1/2", G3/4"

Обжимной фитинг:
NPT1/2", G1/2", G1"

Фланец:
- DN15 PN40 B1, C
- DN25 PN20, PN40, PN100 B1, B2, C
- DN40 PN40 B1
- DN50 PN40 B1
- ASME 1" 150 RF
- ASME 1" 300 RF
- ASME 1 1/2" 150 RF
- ASME 2" 150 RF
- ASME 2" 300 RF

Внутренний диаметр защитной гильзы
- 9x1,25 мм
- 11x2 мм
- 12x2,5 мм
- 14x2 мм
- 16x3,5 мм
- 1/4" SCH80
- 1/2" SCH80
- 1/2" SCH40

Материал смачиваемых частей
- 316 (1.4401)
- 316L (1.4404)
- 316Ti (1.4571)
- Сплав Alloy 600 (2.4816)
- Сплав Alloy C276 (2.4819)
- Сплав Alloy 446 (1.4749)
- Сплав Alloy 321 (1.4541)
- Оболочка: PTFE
- Оболочка: тантал

Шероховатость поверхности смачиваемых частей (Ra)
< 1,6 мкм (63,00 мкдюйма)

Форма наконечника датчика
- прямой
- усеченный
- суженный
- оптимизировано для обеспечения малого времени отклика

Диапазон температуры
-200...1100 °C (-328...2012 °F)

Макс. рабочее давление (статическое)
В зависимости от конфигурации, до 100 бар

Макс. рабочее давление при температуре +400 °C
В зависимости от конфигурации