MHP-A1 combines an outdoor heat-pump unit with a separate storage cylinder. The split arrangement allows the cylinder to be sized to the actual DHW profile and keeps water-side equipment indoors.
Key benefits
- Six models from approximately 3.6 to 18.8 kW
- Manufacturer-stated COP of 4.12–4.51
- Approximately 100–500 L cylinder options depending on model
- Ambient operation down to −15 °C
Applications
- Domestic hot water for homes and apartments
- Hotels, serviced apartments, and small commercial properties
- Replacement or unloading of electric water heaters
- Integration with a building PV system
Selection and integration
Professional refrigerant piping, evacuation, and leak testing are required. Cylinder size, coil, circulation, and output are selected from peak draw-off and required recovery time.
MICOE testing facilities
According to the MICOE catalogue, heat-pump development is supported by 46 specialized laboratories covering performance, reliability, acoustics, and low-temperature operation. Values in this card apply to the listed series models; the final duty point and configuration are confirmed during selection.
Specifications are based on the manufacturer's materials. For supply to Kazakhstan and the EAEU, required certificates, system scope, compatibility, and actual performance at the design condition are confirmed for the selected model and batch.
